These mobile safety steps are fabricated in one rigid structure giving good inherent strength, painted in blue.
This ladder is a cancelled customer order so is in nearly new condition, however we do offer a respray for £10 + VAT if you require. It has front and rear safety bars to ensure maximum safety when using the ladder to load/unload items.
This ladder comes with FREE SHIPPING to mainland UK, excluding Northern Ireland, Scottish Highlands and Islands.
| Dimensions |
Standard (550mm) |
| Platform Height From Ground |
1000mm |
| Overall Length (not inc handles) |
950mm |
| Overall Height |
2000mm |
| Overall Axle Width |
1080mm |
| Platform Size |
550mm x 380mm |
| Step Tread Width |
550mm x 200mm |
| Step Tread Vertical Spacing |
250mm |
| Weight |
50kg |
| Load Capacity |
300kg |
Standard White Nylon Wheels
This ladder is fitted with 200mm dia white nylon wheels at the back. These wheels are hard wearing and robust to give a long life, with each rated to 150kg.
Optional Rubber Wheels
As an optional extra, we can fit rubber tyred wheels. These are the same size and of a similar load rating to the nylon wheels. Rubber has the advantage of being quieter when being rolled and slightly easier to push. They cannot though easily be "skidded" sideways.
Safety Steps Standard Paint Finish
As standard, our mobile safety steps come painted, using a one coat primer/finish - Zinfos 700CT. This gives good adhesion to the steel with the primer for a long and robust life, and smart finished appearance with a 70% gloss level.
Standard Punched Steel Step Treads
As standard, our mobile safety steps are fitted with "punched and raised holes" step treads. These treads are highly slip resistant and also shed water off very efficiently.
The step treads are formed from 2mm mild steel and have 9 mm dia punched and 5 mm dia drainage holes in a square pattern. The 9mm holes are "raised" in such a way that the sharp edge of the hole is exposed which grips the sole of a shoe offering high levels of slip resistance. The step treads pass a 15mm ball bearing test - a standard test for steps and grid flooring. The punched and drainage holes give the profile an unsurpassed high strength to weight ratio.
These treads have been tested for slip resistance by the testing company Lucideon in their UKAS accredited testing laboratory. The "Pendulum Test" was originally developed for road surfaces but has grown to include all manner of surfaces such as supermarket floors or swimming pools.
Our step treads were rated as follows:
Dry test: 66 value - Extremely low
Wet test: 50 value - Low
More info on Slip testing and Ceram can be found by here Slip Resistance Testing
